1. UB
  2. Recherche und Kataloge
  3. eRessourcen
  4. OPUS Siegen
  5. Universität Siegen
  6. Geförderte Open-Access-Publikationen

Citation link: http://dx.doi.org/10.25819/ubsi/10121
DC FieldValueLanguage
crisitem.author.orcid0000-0001-5546-4580-
crisitem.author.orcid0000-0001-8215-0093-
crisitem.author.orcid0000-0003-3869-8945-
crisitem.author.orcid0000-0002-3974-8847-
dc.contributor.authorBrandt, Robert-
dc.contributor.authorWalther, Frank-
dc.contributor.authorSehrt, Jan T.-
dc.contributor.authorBiermann, Dirk-
dc.contributor.authorLindner, Martin-
dc.contributor.authorStern, Felix-
dc.contributor.authorGrimm, Tobias-
dc.contributor.authorHase, Sabrina-
dc.contributor.authorTilger, Meik-
dc.date.accessioned2022-06-08T09:57:09Z-
dc.date.available2022-06-08T09:57:09Z-
dc.date.issued2021de
dc.descriptionFinanziert aus dem Open-Access-Publikationsfonds der Universität Siegen für Zeitschriftenartikelde
dc.description.abstractA stainless precipitation hardening steel has been qualified for powder bed fusion of metals using a laser beam. The mechanical and microstructural properties of additively manufactured samples have been thoroughly investigated and compared to samples of the very same material made by means of ingot casting. Additive manufacturing is feasible and can deliver superior mechanical properties. Additionally, the surface quality will be improved by means of wet abrasive jet machining, and its impact on the residual stresses has been shown.en
dc.identifier.doihttp://dx.doi.org/10.25819/ubsi/10121-
dc.identifier.urihttps://dspace.ub.uni-siegen.de/handle/ubsi/2210-
dc.identifier.urnurn:nbn:de:hbz:467-22106-
dc.language.isoende
dc.rightsNamensnennung 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceScience and Technology of Advanced Materials: Methods, 2 (1), 2022, S. 38-49. - https://doi.org/10.1080/27660400.2021.2023684de
dc.subject.ddc620 Ingenieurwissenschaften und zugeordnete Tätigkeitende
dc.subject.otherParticipation hardening steelen
dc.subject.otherPBF-LB/Men
dc.subject.otherAddiditive-subtractive-manufacturingen
dc.subject.otherSurface topographyen
dc.subject.otherPartizipationshärtender Stahlde
dc.subject.otherAdditiv-Subtraktiv-Fertigungde
dc.subject.otherOberflächentopographiede
dc.subject.swbRapid Prototypingde
dc.titleThe impact of additive manufacturing on the mechanical properties of a stainless precipitation hardening steelen
dc.typeArticlede
item.fulltextWith Fulltext-
ubsi.publication.affiliationDepartment Maschinenbaude
ubsi.source.issn2766-0400-
ubsi.source.issued2022de
ubsi.source.issuenumber1de
ubsi.source.linkhttps://www.tandfonline.com/doi/full/10.1080/27660400.2021.2023684de
ubsi.source.pagefrom38de
ubsi.source.pageto49de
ubsi.source.publisherTaylor & Francis Onlinede
ubsi.source.titleScience and Technology of Advanced Materials: Methodsde
ubsi.source.volume2de
ubsi.subject.ghbsZHUde
Appears in Collections:Geförderte Open-Access-Publikationen
Files in This Item:
File Description SizeFormat
Brandt et al_additive manufacturing.pdf6.76 MBAdobe PDFThumbnail
View/Open

This item is protected by original copyright

View License
Show simple item record

Page view(s)

298
checked on Nov 28, 2024

Download(s)

134
checked on Nov 28, 2024

Google ScholarTM

Check

Altmetric


This item is licensed under a Creative Commons License Creative Commons